TECHNICAL REPORT Evaluation
of plate stiffness from plastic ...
To transfer test results of ETICS according to ETAG 004 using anchors tested according to ... This value has to be stated in the ETA (for the plastic anchor ... stiffness from plastic anchors according to ETAG 014 for fixing of external ...
http://www.eota.be/html/tr/TR-026.pdf
TECHNICAL REPORT
Determination of point thermal transmittance of ...
shall be stated in the ETA with regard to the areas of thickness h of the insulation layer. ... ETAG 004: Guideline for European Technical Approval ... for PLASTIC ANCHORS FOR FIXING OF EXTERNAL THERMAL INSULATION COMPOSITE ...
http://www.eota.be/html/tr/TR-025.pdf
ETAs
issued by TZUS Praque
ETAG 004 30.5.2007. 29.5.2012. ETA-07/0139 Plastic anchor JANSA PTP 10/50-. La. Plastic nailed - in anchors for fixing of ...
http://old.tzus.cz/en/downloads/ETA_TZUS_web_AJ_09.pdf
European
Technical Approval ETA-07/0162
Description in accordance with clause 3.2.2.5 of ETAG 004 ..... ETA-04/0064: EJOT SDM-T plus - screwed- in plastic anchor for fixing of external thermal ...
http://www.isofassade.de/images/ISOFacade- in Situ.pdf
ETAG
004 EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS WITH
RENDERING
ETAG 004. These samples are prepared according to the ETA applicant's ...... Evaluated according to ETAG "Plastic anchors for fixing of external thermal ...
http://www.itb.pl/old/ue/dok/proj-eota-izolacje.pdf
European Technical Approval ETA-07/0336
Guideline for European technical approval of "Plastic anchors for fixing of ... composite systems (ETICS) according to ETAG 004 in concrete and masonry. ...
http://www.koelner.pl/download/nowe_aprobaty/Fasady/TFIX-8M/ETA-07-0336-TFIX-8M(eng.).pdf
European Technical Approval ETA-06/0266
an ETA and, depending on the fixing type and substrate have a minimum pull-out strength of ..... requirements of ETAG 004 : 2000 (removal of existing ... The effect of anchors with plastic nails will be less than those mentioned above. ...
http://www.netweber.co.uk/fileadmin/user_upload/Certificates/EWI/ETA-06_0266_weber.therm_XM_Certificate.pdf
European
Technical Approval
carried out in compliance with ETAG 004 Edition March 2000 and ITC-CNR has carried out .... 2000, being “KIBITHERM” a bonded system, the Fixing strength ... be taken into account if not specified in the eventual anchor's ETA: ... negligible for anchors with plastic nails (reinforced or not with glass fibres …). ...
http://www.aedilitia.itc.cnr.it/ETA/ETA_Kimia_ing.pdf
European
Technical Approval
Systems with rendering” Edition March 2000 (called ETAG 004 Edition March 2000 in the ..... Fixing strength (Displacement test) and Wind load resistance ... be taken into account if not specified in the eventual anchor's ETA ... negligible for anchors with plastic nails (reinforced or not with glass fibres …) ...
http://www.aedilitia.itc.cnr.it/ETA/ETA_MaxMeyer_en.pdf
European Technical Approval ETA-05/0009
Nailed-in plastic anchor for fixing of external thermal insulation .... composite systems (ETICS) according to ETAG 004 in concrete and masonry. The base ...
http://www.ejot.pl/picture/pdf/ETA-05-0009_ejotherm NT U_und_NK U eng.pdf
Anchor
table ejotherm anchors with European Technical
Approval ...
ETAG 004: external thermal insulation composite systems with rendering. ● ETAG 014: plastic anchors for fixing external thermal insulation composite systems with rendering .... be assigned with its approval since anchors with ETA are ...
http://www.ejot.hu/letoltes/katalogus/etics-en.pdf
Deutsches
Institut für Bautechnik
Nailed-in plastic anchor for fixing of external thermal insulation ... die Verankerung von verklebten Wärmedämm-Verbundsystemen (WDVS) nach ETAG 004 ...
http://www.ejot.hu/letoltes/eta/ejotherm-nt-u.pdf
ETA-05-0055 v Aj
Guideline for European Technical Approval of „Plastic Anchors for Fixing of ... ETAG 004 in concrete and masonry. The base material shall consist of ...
http://www.baucolor.ru/data_files/file/eurosertifikat/ES.pdf
Slovenian National Building and Civil Engineering Institute
The choice of the method of fixing depends on the characteristics of the ... ETAG no. 004 in this ETA). The ETA is issued for the ETICS on the basis of agreed ..... Plastic anchors (used as an ancillary component without contribution to ...
http://www.jub.si/jub_katalog/media/eta.jubizol.mp2.eng.pdf
Zavod za gradbeništvo Slovenije
The choice of the method of fixing depends on the characteristics of the substrate, ... Composite Systems with rendering (called ETAG 004 in this ETA). ..... Plastic anchors (used as an ancillary component without contribution to ...
http://www.jub.si/jub_katalog/media/eta.jubizol.ml2.eng.pdf
European
Technical Approval ETA-08/0267
Screwed-in plastic anchors for fixing of external thermal ... ETAG 004 in concrete and masonry. The base material shall consist of reinforced or ...
http://www.bravoll.cz/soubory_skupin/5/ETA_080267_PTH_S_EN.pdf
Evropské
technické schválení ETA-08/0267
Screwed-in plastic anchors for fixing of external thermal insulation ... s omítkou (dále ETICS) podle ETAG 004 jejich ukotvením do betonu nebo zdicího ...
http://www.bravoll.cz/soubory_skupin/5/ETA_080267_PTH_S_CZ.pdf
DAP Deutsches
Akkreditierungssystem Prüfwesen GmbH
ETAG 004. 2001-10. Guideline for European Technical Approval of Plastic Anchors for Fixing of external thermal Insulation composite Systems with rendering ...
http://www.dap.de/anl/PL410600e.pdf
DAP Deutsches
Akkreditierungssystem Prüfwesen GmbH
ETAG 001. 1997-01. Guideline for Technical Approval of Metal Anchors for use in ... ETAG 004. 2001-10. Guideline for European Technical Approval of Plastic Anchors for Fixing of external thermal Insulation composite Systems with rendering. EOTA TR 020 ... according to Article 9.2 of the CPD: Concrete Screws; ETA ...
http://www.dap.de/anl/PL410600.pdf
Deutsches Institut für Bautechnik
Guideline for European technical approval of "Plastic anchors for fixing of external ... composite systems (ETICS) according to ETAG 004 in concrete and masonry. .... Bautechnik will decide whether or not such changes affect the ETA and ...
http://content.fischer.de/cbfiles/Fischer/Zulassungen/ZD_E0_01_TERM8_F_#SEN_#AIP_#V3.pdf
Europäische Technische Zulassung ETA-03/0019
Nailed-in plastic anchor for fixing of external thermal insulation .... Verankerung von verklebten Wärmedämm-Verbundsystemen (WDVS) nach ETAG 004 im ...
http://content.fischer.de/cbfiles/Fischer/Zulassungen/ZD_E0_01_TERM8N_F_#SD_#AIP_#V4.pdf
European Technical Approval ETA-04/0052
ETAG 004 Guideline for European Technical Approval of External Thermal Insulation ..... by plastic anchors and for anchors with an air gap at the head ...
http://www.etadanmark.dk/danish/eta/pdf/ETAer/RW UK ETA Final.pdf
29_jubizol_facade
06
JUBIZOL Glass fibre mesh (according to ETAG 004), fixing plastic anchors (according to ... All the systems have ETA (European Technical Approval) issued by ...
http://www.jubsystems.co.uk/tehnicnilisti/listi/29.pdf
1 PRIMERS 2
LEVELING COMPOUNDS 4 INTERIOR WALL PAINTS 7 DECORATIVE ...
JUBIZOL Glass fibre mesh (according to ETAG 004), fixing plastic anchors (according to ETAG 014). INITIAL TYPE. TESTING,. CONTINUOUS. SURVEILLANCE. ETA: OIB ...
http://www.jubsystems.co.uk/pdf/JUB Product Range.pdf
European
Technical Approval ETA 07 / 0002
Supplementary fixings: (Expansion plastic anchors for insulation material with .... Bond Strength results on Concrete according to ETAG 004 § 5.1.4.1.2. ...
http://reveton.com/product_files/ETA 07-0002.pdf
Rysunek2
Anchor« covered by ETA issued according to ETAG 014 can be used. Base coat ..... The thermal bndges caused by mechanical fixing devices (anchors) increase the ... plastic material and for anchors with an air gap at the head of the ..... To the indication on use, maintenance and repair ETAG 004. clause 7 3 applies. ...
http://www.bolix.pl/pdf/certyfikaty/ETA Bolix W - english www.pdf
Apro-a.pdf
ETA-08/0204. Nailed-in plastic anchors for fixing of external thermal .... (ETICS) according to ETAG 004 in concrete and in masonry. The substrate (base ...
http://www.mkam.pl/eta_eng.pdf
aprob1.pdf
Nailed-in plastic anchors for fixing of external thermal .... izolacji cieplnej z wyprawami tynkarskimi (ETICS) wg ETAG nr 004, w podłożu ... Oprócz zapisów zawartych w ETA, związanych z substancjami niebezpiecznymi, ...
http://www.mkam.pl/eta_pol.pdf
European Technical Approval ETA-03/0027
The choice of the method of fixing depends on the characteristics of the ..... negligible for anchors with plastic nails (reinforced or not with glass fibres …) ..... The requirements given in ETAG 004, chapter 7, have to be considered. ...
http://www.sto.be/evo/web/sto/4565_VL-ETA-ETA_StoTherm_Classic_Eng.pdf
ETA-ENG 03.0037 StoTherm Vario .PDF
Composite Systems with rendering" ETAG 004, edition March 2000. .... According to ETAG 014 or CUAP „Powder actuated fastener for the fixing of insulation products" ..... by plastic anchors and for anchors with an air gap at the head ...
http://www.sto.be/evo/web/sto/4891_VL-ETA-ETA-ENG_03.0037_StoTherm_Vario_(2004.09.01).pdf
untitled
Definition of the product according to ETA 05/0054. Insulation material and related method of fixing. Insulation product. Expanded polystyrene slabs EPS or ... of the specified amount of water (0.24 - 0.28 l/kg). Plastic anchors. BRAVOLL PTH-KZ 60/8-La, ... Description in accordance with § 3.2.2.5 of the ETAG 004. ...
http://www.stomix.com/pdf/systemy/prohlaseni-uk-alfa-2010.pdf
untitled
Plastic anchors. Plastic anchors. PTH-KZ (ETA-05/0055),. EJOTHERM ST U (ETA-02/0018), ... Description in accordance with § 3.2.2.5 of the ETAG 004. ...
http://www.stomix.com/pdf/systemy/prohlaseni-uk-beta-2010.pdf
European
Technical Approval ETA-05/0092
The choice of the method of fixing depends on the characteristics of the ... Systems with rendering (called ETAG no. 004 in this ETA) and the “UEAtc .... negligible for anchors with plastic nails (reinforced or not with glass fibres …) ...
http://ex.cstb.fr/app/ate/pdf/Doc_ETA_05_0092_UK.pdf
Centre
Scientifique et
The choice of the method of fixing depends on the characteristics of the ... ETAG no. 004 in this ETA) and the “UEAtc Directives for the Assessment for ..... Anchors made of a plastic expansion sleeve with a plate and of a plastic or ...
http://ex.cstb.fr/app/ate/pdf/Doc_ETA_10_0049_UK.pdf
Bravoll_PTH_60_10
a PTH-KZ_60_10_ETA_EN
Guideline for European Technical Approval of „Plastic Anchors for Fixing of ... ETAG 004 in concrete and masonry. The base material shall consist of reinforced or .... The ETA only applies to the manufacture and use of the anchor. ...
http://www.bravoll.eu/soubory_skupin/5/ETA_080166_PTH_10_EN.pdf
fSITAC
Page 2(19) of European Technical Approval ETA 06/0036 issued on 2006-01-18 .... The reaction to fire is determined according to ETAG 004 clause 5.1.2.1. Note that in some member .... plastic anchors and for anchors with an air gap at the head of the .... safety in use of the ETICS according to the method of fixing. ...
http://murbudin.is/assets/files/Ny_pdf/2006-01-18_ETA-06-0036_Serpotherm_EF.pdf
ÍSITAC)
The reaction to fire is determined according to ETAG 004 clause 5.1.2.1. Note that in some member ... e 6(19) of European Technical Approvili ETA 06/0035 issued on 2006-01-18 .... plastic anchors and for anchors with an air gap at the head of the .... safety in use of the ETICS according to the method of fixing. ...
http://murbudin.is/assets/files/Ny_pdf/2006-01-18_ETA-06-0035_Serpomin_EFa.pdf
FOD economie
Page 2 of European Technical Approval ETA-01/0001 Permanent insulating ..... Guideline for European Technical Approval, ETAG 004 "External Thermal ... have the necessary strength, as for the traditional solutions (fixing to the concrete ... When imposed by local requirements plastic anchors through the strips to in ...
http://www.sismo.eu/downloads/ETA 01 0001 Sismo 2005 EN 2006-2011.pdf
UNION BELGE POUR L'AGREMENT TECHNIQUE DANS LA CONSTRUCTION
taken Into account If not specified In the anchor's ETA: ..... The requirements given in ETAG 004, chapter 7,as well as the Information of paragraphs 4,2.2 ...
http://91.199.4.110/media/15bc9129-93a5-4126-a077-292bd6e40325.pdf
Building
Testing and Research Institute
2 Feb 2010 ... Descriptions in accordance with § 3.2.2.5 of the ETAG 004. ... The choice of the method of fixing depends on the characteristics of the substrate, which could need ..... If not specified in the anchors ETA, the following ... covered by plastic material and for anchors with an air gap at the head ...
http://www.murexin.fr/upload/sonstiges/ETA_ESS.pdf
C:\Documents and Settings\Domowy\Moje dokumenty\INSTYTUT TECHNIKI
...
Guideline for European Technical Approval of „Plastic Anchors for Fixing of ... (ETICS) according to ETAG 004 in masonry. The substrate (base material) ...
http://www.rawlplug.pl/download/nowe_aprobaty/Fasady/KI-10N_KI-10NS_KWL/ETA-07_0221_KI10N_NS_EN.pdf
Deutsches
Institut für Bautechnik
Nailed-in plastic anchor for fixing of external thermal insulation ... composite systems (ETICS) according to ETAG 004 in concrete and masonry. The base ...
http://www.ejot.cz/picture/certifikaty_vyrobku/ETA05-0009_EN.pdf
Mechanické
upevnění ETICS
blokem v ETAG 004 a samostatný řídící pokyn pro evropská technická schválení ... V ETA jsou pro konkrétní výrobek stanoveny na základě postupu uvedeného v řídícím .... of stiffness from plastic anchors for fixing of external thermal ...
http://www.ejot.cz/picture/pdf/mechanicke-upevneni-etics.pdf
TITLE
The reaction to fire is determined according to ETAG 004 clause 5.1.2.1. ..... Evaluated is according to ETAG "plastic anchors" or having obtained an ETA. ...
http://www.zelenausporam.cz/vyhledavani/gallery/445-eta_08_0385_kematerm_system_mineral_ang.pdf
B 195
ETAG 004. ETAG-005. ETAG 006. Description. Metal anchors for use in Concrete Part 1 ..... ETA- Nailed in plastic anchor for fixing of external thermal ...
http://www.doi.gov.mt/en/legalnotices/2004/01/LN29.pdf
07/022
Construction
ETAG 004. External thermal insulation composite systems with rendering. May 2003. ETAG 005 ..... Nailed-in plastic anchor for fixing of thermal insulation ...
http://www.doi.gov.mt/en/legalnotices/2008/01/LN 25.pdf
ÖSTERREICHISCHES
INSTITUT FÜR BAUTECHNIK
Descriptions in accordance with §3.2.2.5 of the ETAG 004 Remain υ. idertheETA- materials .... be taken into account if no! specified in the anchor's ETA: ... negligible for anchors with plastic nails (reinforced οι .... anchor),. - the safety in use of the ETICS according to the method of fixing. 4.2.3 Execution ...
http://www.jubiland.gr/pdf/ETA_BIOCOAT_ENG_08.pdf
Page 1 Page 2 I LEGAL BASES AND GENERAL CONDITIONS 1. This ...
ETAG no. 004 in this ETA). The ETA is issued for the ETICS on the basis of .... for anchors with a stainless steel screw covered by plastic anchors and for ...
http://www.jubiland.gr/pdf/ETA_JBZ_KS_08_EN.pdf?phpMyAdmin=rVPZSIHwgWz9v3NgDrwuiZNlo-c
ETA_06_0260_ceresit VWS classic
The reaction to fire was determined according to ETAG 004, clause 5.1.2.1 .... 0.002 W/K for anchors with a stainless steel screw covered by plastic anchors ...
http://www.henkel321.com/fileadmin/pdf/271008/valise5/AT_ETA_ceresit VWS classic.pdf
ETA_06_0260_ceresit VWS classic
The reaction to fire was determined according to ETAG 004, clause 5.1.2.1. The product as .... be taken into account if not specified, in the anchor's ETA: ...
http://www.insulatedrenders.co.uk/files/pdfs/AT_ETA_ceresit VWS classic.pdf
1 2
